2012 ELM327 OBDII WiFi Diagnostic Wireless Scanner Apple iPhone Touch (ADE-090-2MX) - Wholesale Electronics from Tradestead.com

2012 ELM327 OBDII WiFi Diagnostic Wireless Scanner Apple iPhone Touch

Model:: ADE-090-2MX

Brand:: (Generic Brand)

Rating:: Write a review

Start From:: 1 Piece(s)

Unit Price:

USD $EUR €GBP £AUD $CAD $HKD $JPY ¥CNY ¥

34.67 To 40.39

Wholesale Prices:

Quantity
Level 1 Price

1 - 2
US$40.39

3 - 4
US$38.83

5 - 9
US$37.44

10 - 19
US$36.75

20 - 49
US$36.23

50 - 99
US$35.36

100 or more
US$34.67

Get Lower Price

Wifi ELM327 interface is able to detect and interpret obd2 / eobd protocols automatically. It also provides support for high speed communications and a low power sleep mode. It use AT commands to communicate with a host device (PC, notebook, iPhone, iPod touch, iPad and so on). There are plenty of software packages available, which are fully compatible with this tool. Some of them have pretty useful features, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc. You can even write your own software on a specified hardware platform if you wish, because the AT commands are fully documented and very well explained. This tool is only 2.7 x 1.25x 0.9 inches, and it comes with a 6 ft OBDII cable for easy installation. It also includes a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBDII port. It is compatible with 1996 and later vehicles which are obd2 or eobd compliant. Connecting to your iPhone / iPod touch is made by WIFI connection in adHoc mode

Main Features

With proper software installed in the host device, you may have following parameters read out from your vehicle:
Vehicle Speed,RPM,Fuel Consumption*,Engine Coolant Temp,Fuel Pressure,Calculated Engine Load,Throttle Position,Intake Manifold Pressure,Air Intake Temp,Timing Advance,Mass Air Flow,Fuel Level,Barometric Pressure,EVAP System Vapor Pressure,Fuel Trim
Note:**Your vehicle may not support all above parameters. How many parameters you can get is depended on the vehicle manufacturer’s implementation
Multi-Protocol Support:
SAE J1850 PWM (41.6 kbaud)
SAE J1850 VPW (10.4 kbaud)
ISO 9141-2 (5 baud init, 10.4 kbaud)
ISO 14230-4 KWP (5 baud init, 10.4 kbaud)
ISO 14230-4 KWP (fast init, 10.4 kbaud)
ISO 15765-4 CAN (11 bit ID, 500 kbaud)
ISO 15765-4 CAN (29 bit ID, 500 kbaud)
ISO 15765-4 CAN (11 bit ID, 250 kbaud)
ISO 15765-4 CAN (29 bit ID, 250 kbaud)
SAE J1939
Work with all models that support the OBD2 standard ( Acura, Alfa Romeo, Ariel Atom, Aston Martin, Audi, Bentley, BMW, Buick, Cadillac, Chevrolet ,Chrysler, Citroen, Daewoo, Daihatsu, Daimler, Dodge, Ferrari, Fiat, Ford, Geo, GMC Holden, Honda, Hummer, Hyundai, Infiniti, Isuzu, Jaguar, Jeep, Kia, Lamborghini, Lancia Land Rover, Lexus,Lincoln, Lotus, Maserati, Mazda, McLaren, Mercedes, Mercury, MG, Mini Mitsubishi, Nissan, Oldsmobile, Opel, Pagani, Panoz, Peugeot, Plymouth, Pontiac, Porsche Regal, Renault, Rolls Royce, Roush, Rover, Saab, Saleen, Saturn, Seat, Scion, Shelby Skoda, Smart, Subaru, Suzuki, Tesla, Toyota, Triumph, TVR, Vauxhall, Volkswagen, Volvo, Yugo etc...)
For your information:
For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant
All vehicles from 1996 in USA and Petrol cars from 2001,diesel cars from 2003/2004 in Europe are obd2 compliant
Hardware requirements: PC/iPhone/iPod/iPod Touch/iPad
Important: Your PC requires wireless LAN router supporting WiFi 802.11 a/b/g for linking
Software Requirements:
All ELM327 based software
iOS base software in Apple store: Rev / FUZZYCar / DashCmd / SpeedPORT / Nova Scan
Attention: iOS base software are not included you must buy from Apple App Store! we only offer PC version software & Instructions manual (on the CD)