V.W ISO-8Pin USB+SD MP3 Adapter, Supports SD/SDHC/MMC card/U Disk/Card Reader/Hard Disk (ADE-086-2MX) - Wholesale Electronics from Tradestead.com

V.W ISO-8Pin USB+SD MP3 Adapter, Supports SD/SDHC/MMC card/U Disk/Card Reader/Hard Disk

Model:: ADE-086-2MX

Brand:: (Generic Brand)

Rating:: Write a review

Start From:: 1 Piece(s)

Unit Price:

USD $EUR €GBP £AUD $CAD $HKD $JPY ¥CNY ¥

64.45 To 74.44

Wholesale Prices:

Quantity
Level 1 Price

1
US$74.44

2
US$71.54

3 - 6
US$69.61

7 - 14
US$68.32

15 - 29
US$67.35

30 - 99
US$65.74

100 or more
US$64.45

Get Lower Price

V.W ISO-8Pin USB+SD MP3 Adapter is a Audio car kit. It is a replacement of CD changer. It can be easily installed and used. The installation and usage are the same as CD charger's installation and usage, simply plug in USB disk/SD card, you can play audio through car audio system and enjoy music in your car.

Main Features

Plug and play, CDC alternative
Connected with wire harness, not FM signal controlled ,Hi-Fi guaranteed
Controlled by vehicle Head Unit, support Steering wheel operation
With imported Hi-Fi Decoding Chip, perfectly support MP3 and WMA tracks
Supports SD/SDHC/MMC card/U Disk/Card Reader/Hard Disk
Supports external audio source(MP3 MP4 PSP Mobile Phone) via AUX in port
Playlist function same as multi CDs
Supports Last Position Memory (LPM)
Vibration and interference proof
Easy to install, no damage to original car decorations for different car models or car radios
Note:
(1) Compatible with the following factory radios: VW: Alpha 5 ,Beta T4, Beta 5, Gamma 5, Gamma CD, Gamma(New Beetle), VW Z9Z7(New Beetle). Skoda: Symphony CD, Symphony Kassette, Rhapsody;Seat: Alana,Aura CD, Beta,Elba, Highline, Lena; Audi: Chorus 2, Concert 1, Concert 2, Symphony 1, Symphony 2
(2) Not compatible with Navigation system
(3) Able to hook up with existing CD Changer
(4) As for Polo 2004, single-disc CD radios with MP3 function are workable, while single-disc CD radios without MP3 function are NOT workable
(5) Audi 20pin connector(WT-Audi20) is optional for avoiding modification on Audi 8pin radios
Installation steps:
1. Pull out the unit from the car and touch the back of the unit for CDC port when the ignition is switched of
2. Insert the CDC plug into the original car port correspondingly. Then insert the storage card
3. Then check if the device works normally or not after power supply given from the car itself
4. Put the wire harness into the proper and good place after the test successfully